






켄우드 인티앰프 KA-7010 입니다.
220V
200 W per channel into 4 Ohm
125 W per channel into 8 Ohm
Total harmonic distortion: 0.06 %
Intermodulation distortion: 0.005 %
트랜스 두 개 장착. 턴테이블바늘 MM. MC 사용
음질과 힘을 모두 신경써서 만든 제품으로
내부가 먼지 하나없이 깨끗하며
일체의 잡음없이 작동 깨끗합니다.
실물사진입니다.
착불 15만원
010-3151-3159
저임피던스 부하에서 스피커 구동 성능이
향상된 프리메인 앰프입니다.
전원 공급 장치는 양극과 음극에 각각
전용 트랜스포머를 사용합니다.
전원 트랜스포머는 420VA의 대용량이며,
총 용량이 30000μF인 7500μFx4 전해 콘덴서를
탑재했습니다 .
저임피던스 부하에서 구동 성능을 향상시키기 위해
출력단에는 Pc = 200W의 고출력 트랜지스터를
사용합니다.
음악 신호와 전원 접지선의 혼입으로 인한 왜곡을
방지하기 위해 순수 신호 접지선을 개발 및 채택했습니다.
이 시스템에서는 전원 리플과 각종 노이즈 성분이
전용 접지선을 통해 스피커 단자로 유입되고,
모든 접지선이 연결되어 모든 접지선이 처음으로 결합됩니다.
결과적으로 순수 신호만 신호를 증폭하는 메인 접지선을
통해 흐르게 되어 순수 증폭이 가능합니다.
신호 경로를 최소화하고 부품 간의 상호 간섭을 제거하기 위해
내부 레이아웃을 고려했습니다.
General
Manufacturer: Kenwood
Model: KA-7010
Type: Integrated amplifier
Years of manufacture: 1989 - 1990
Made in: Japan
Color: Black
Remote control: no
Power consumption: 300 W max.
Dimensions: 440 x 140 x 398 mm (WxHxD)
Weight: 15 kg
Original price approx.: 998 DM
Connections
Inputs:
PHONO (inputs with gold-plated RCA inputs): MM/MC switching.
CD/DVD
TUNER
AUX
TAPE/MD/DAT-1
Tape/MD/DAT-2
Tape/MD-3
Outputs:
Speaker: A and B, A/B
Headphone jack
Specifications
Output power:
Max. Continuous output power (DIN):
2 x 155 W into 4 Ohm
2 x 105 W into 8 Ohm
Dynamic power:
270 W per channel into 2 Ohm
200 W per channel into 4 Ohm
125 W per channel into 8 Ohm
Total harmonic distortion: 0.06 %
Intermodulation distortion: 0.005 %
Frequency response: 1 Hz - 100 kHz/ + 0 dB, - 3 dB
Attenuation factor: 160
Noise-to-voltage ratio: 110 dB
Logical flow design with shortest possible signal paths
2-stage Darlington amplifier circuit with parallel push-pull power transistors
Signal line isolated from ground
Rec Out selector switch for second program source.
Controls:
Bass
Balance Treble
loudness switch (+6 dB 100 Hz/+3 dB 10 kHz)
Symmetrical signal routing from input selector to power amplifier with Source Direct
Subsonic filter (18 Hz, -18 dB/oct.)
Muting switch (-30 dB)
Infrasonic filter